How To Apply Latisse Without Applicator

Step 3 apply to skin using applicator Then, dip the tip of your brush into the solution and apply it precisely to the upper lashlines.

SUCCESS STORIES Arlene. Unretouched, without mascara

Get the sterile applicator from the kit;

How to apply latisse without applicator. Only apply at the base of the upper lashes. Remove contact lenses prior to applying latisse ®. 3.carefully apply the solution along the skin at the base of the upper eyelashes.

Remove an applicator from it's tray. Step 2 prepare the applicator remove and applicator from its tray. You'll find that only the one drop is necessary to treat both eyes.

Mascara can cause contact lens irritation. Take a thin brush and apply a drop of latisse to it. Use one applicator for each eye and throw away after use.

Brush the applicator along the skin of the upper eyelid, where the skin meets the eyelashes. You do not use the applicator along the bottom lashes or you might see hair growth outside of the intended area. This area should feel lightly moist without runoff step 4 blot excess latisse blot any excess solution beyond the eyelid with a tissue.

Then, holding the sterile applicator horizontally, place one drop of latisse ® solution on the area of the applicator closest to the tip, but not on the tip. Any excess solution should be blotted off with a dry tissue. There should be sufficient amount of disposable applicators that come with your box of latisse.

But if you find that you may need more you can use the disposable eyeliner brushes that can be found around the makeup area. Step 3 apply to skin using applicator immediately draw the applicator carefully along the skin at the base of the upper eyelashes (where the eyelashes meet the skin) just as you would apply liquid eyeliner. Apply to skin using applicator

Then, holding the applicator horizontally, apply one drop on the applicator closer to the tip, but not directly on it. Once nightly, place one drop of. Immediately draw the applicator carefully along the skin at the base of the upper eyelashes just as you would apply liquid eyeliner.

The solution will soak into the applicator, making it easy to apply to your eyelid. To apply latisse, take out one applicator at a time. Then draw the applicator carefully across the skin of the upper eyelid margin at the base of the eyelashes, going from the inner part of the lash line to the outer part.

Apply one drop of latisse to an applicator. Then, holding the sterile applicator horizontally, place one drop of latisse solution on the area of the applicator closest to the tip. To get the most out of your bottle of latisse, many dermatologists suggest using the product slightly differently than outlined in the patient insert and on the latisse website.

Remove the applicator from the packaging. Apply to skin using applicator immediately draw the applicator carefully along the skin at the base of the upper eyelashes (where the eyelashes meet the skin) going from the inner part of your lash line to the outer part. Prepare the applicator remove an applicator from its tray.

Immediately draw the applicator carefully along the skin at the base. Then, holding the sterile applicator horizontally, place one drop of latisse® solution on the area of the applicator closest to the tip but not on the tip. Latisse® (bimatoprost ophthalmic solution) 0.03% on the disposable sterile applicator supplied with the package and apply evenly along the skin of the upper eyelid margin at the base of the eyelashes.

The patient removes a sterile applicator from its tray and, holding it horizontally, places one drop of latisse ® on the area of the applicator closest to the tip, but not on the tip. Apply to skin using applicator immediately draw the applicator carefully along the skin at the base of the upper To apply the medication, take one applicator out from its packaging.

Then immediately gently swipe the applicator over the skin of the upper eyelid at the base of the eyelashes, moving from the inside of the eye to the outside. The same process is repeated on the other eyelid using a fresh applicator brush. Latisse is especially good for contact lens wearers.

Only use the sterile applicators supplied with latisse ® to apply the product. Once 15 minutes have passed since applying latisse, you may reinsert your contact lenses. I instruct my patients to place 1 drop of latisse directly onto a very tiny eyeliner brush, or into the cap of the bottle and dip the brush into the cap.

Do not let the tip of the bottle or applicator touch your fingers or anything else to avoid contamination. You only need to add one drop of latisse close to the tip of the applicator. If applied correctly, the upper eyelid margin area of lash growth will feel mildly moist, without runoff.

Don't allow the tip of the bottle or applicator to touch fingers or any other unintended surface, as contamination by common bacteria is known to cause infections. Blot away any excess liquid to avoid liquid running onto your cheek. Apply latisse nightly, with the applicator, but only at the base of the lashes of the upper eyelid.

Do not apply to the lower eyelid. Blot any excess solution beyond the eyelid margin. Turn the cap of the latisse bottle upside down, and place one drop of latisse into the cap.

4.after applying, blot off any excess solution with a cloth or tissue. Prepare the special applicator by placing a drop of solution on the applicator and apply it to the base of the upper eyelid where the lash base meets the skin of the eyelid. Then, holding sterile applicator horizontally, place one drop of latisse™ solution on the area of the applicator closest to the tip but not on the tip.

This area should feel lightly moist but without a runoff. Hold the applicator horizontally, then apply one drop of the latisse solution to the applicator. Carefully drag the applicator along the upper eyelashes where they meet the skin.

Contact lenses may be reinserted 15 minutes afterwards. Ensure the face is clean, makeup and contact lenses are removed. Then, holding the sterile applicator horizontally, place one drop of latisse® solution on the area of the applicator closest to the tip but not on the tip.

Then holding the applicator horizontally, place one drop of the solution on the applicator brush. You should remove any makeup, clean the upper eyelids and remove contact lenses, if applicable. Apply the latisse to the area closest to the tip of the applicator, but not directly onto the tip.

Then use the applicator to apply the.

Careprost Eye_Drops Bimatoprost Ophthalmic Solution 0