How To Operate A Forklift Pdf

How to operate a forklift: Raymond 4100 forklift operation manual.

Yale A875 2006 DE Lift Parts Manual PDF Download

Maintenance, supervision, maintenance and repair to repair equipment damage, maintain its technical.

How to operate a forklift pdf. Slowly move forward then extend the forks by pressing the button near the control handle. Planned preventive maintenance consists of the following measures: For industrial trucks powered by an electric motor, know the location of the emergency isolator and know how to operate it.

Note that on the checklist. Traveling and maneuvering the forklift. Remove the key from the powered industrial truck and place a danger do not operate tag on the steering wheel or control lever of the powered industrial truck.

This includes avoiding all pedestrians in the work area. A forklift is a vehicle similar to a small truck that has two metal forks on the front used to lift cargo. At all times, an operator’s hands, arms, feet, legs, and head must remain within the forklift truck.

If the load is not pushed up right against the forklift truck tines (forks). Raymond 4100 forklift operation manual pdf. Forklift operations • always operate the vehicle according to the manufacturer’s instructions.

The employee should take the completed checklist to the manager/supervisor and inform them of the problem. Duties of workers workers are expected to: How to operate a stand up forklift.

• always wear a seatbelt when the forklift has one. Always face the direction of travel. Report the occurrence of any new hazard.

Forks, whether loaded or not, should be kept as low to the ground as possible and. • use the training, instruction and personal protective equipment provided by the employer. All operations involving lift trucks must comply with the management of health and

• work and act safely. Make sure to keep the load two inches away from the ground when moving. Park the forklift in a safe place, on level ground;

A forklift is a powered industrial truck used to lift and move loads. Do not operate an industrial truck with a leak in the fuel system. • locate the load’s center of gravity.

A moving forklift is a dangerous forklift. The forklift operator drives the forklift forward until the forks push under the cargo, and can then lift the cargo several feet in the air by operating the forks. If the lift truck is unsafe to operate:

The answer is anyone who wants to operate a forklift should be trained by an experienced trainer because forklifts poses many hazards. Ways to prevent these hazards include: Fitness to operate a lift truck (forklift) occupational health procedure.

Tlilic0003 licence to operate a forklift truck course duration and delivery: Check with your local workplace safety authority (see page 19) for requirements in your state or territory. Never operate a forklift for an extended time within a trailer or boxcar without proper ventilation.

Identify, as appropriate, handling attachments which may. In some states and territories you are also required to hold a licence to operate a forklift. • inspect the load for stability, projections, and damaged pallets before lifting.

The load centre distance is measured from the vertical face of the fork to the centre of gravity of the load. Do not make repairs, alterations or adjustments to any industrial truck unless authorised. Onroad offroad training complex 24 jackson street, glenorchy tas 7010 onroad offroad devonport complex 129 wright st, east devonport tas 7310

200 deaths and 38,000 injuries/year. Pedestrians use the same roadway, so sound the horn at intersections and blind spots. Divide by 2 the distance from the vertical face of the forks to the end of the load to get the load centre distance.

Here is our pdf bundle that includes the raymond 4100 forklift operation manual you need (pdf formats). The forks, also known as blades or tines, A forklift is a type of “powered industrial truck” covered by dosh standards.

Do not start or operate your forklift, including any of its functions or attachments, from any place other than the designated operating position. Handling loads with the forklift. Like other powered industrial trucks, its purpose is to move, carry, push, pull, and lift a material load then stack it or place it in a storage rack (tier).

Forklift to increase load capacity is extremely dangerous. The operator of the forklift truck is responsible for operating in a safe manner; To operate a forklift you must be trained and hold a relevant qualification.

Access raymond 4100 forklift operation manual. • never drill a hole in the forks to use as a way of towing something or as a place to put a chain hook when hoisting. When the forks are firmly in place, slowly raise the load and retract the forks.

This raymond 4100 operation and owners manual contains information you need to operate your lift truck equipment. Never on a slope leave the forklift with the mast tilted forwards and the forks fully lowered, with the tips on the floor apply the parking brake, select neutral, switch off the engine and remove the key return keys or other activating devices to. Supervisors assigning a worker to operate a forklift must ensure the worker is competent and closely supervised until the worker can work safely.

This procedure applies to anyone who is approved to operate a lift truck on behalf of loughborough university. We’ll break down instruction on how to drive and operate a forklift into three sections: Schaeff operating manualschaeff operating manual 1616 2121 tilting &tilting & sideshiftingsideshifting tilt forward tilt back sideshift left sideshift right tilting the mast and sideshifting the carriage are controlled by a.

Best Forklift Operator Resume Example Livecareer Job