How To Tie Dye Sweatshirt With Bleach

Note that this sweatshirt is navy blue. Once you have the circles ready, give the sweatshirt a good spray with the bleach mixture.

Pin by Natalie Johnson on Crafts & DIY in 2020 Bleach

For the second sweatshirt, my son filled the laundry room sink up with water and bleach.

How to tie dye sweatshirt with bleach. How to bleach tie dye a sweatshirt. How to bleach tie dye: Fold or crumple up the sweatshirt, and secure the folds with the rubber bands.

Halfway through the soaking, we flipped the sweatshirt. Since bleach removes the color, the resulting sweatshirt will be the absence of the dye. Then enjoy your totally awesome sweatshirt!

(if you didn’t wear gloves, wash hands well to remove any bleach.) Only 2 available and it's in more than 20 people's carts. Here are the basic bleach tie dye instructions.

You will want to get the sides and flip your disk. Next, fill a spray bottle with a mixture of 1/2 bleach and 1/2 water. Tie dyeing traditionally is done with a white shirt and then you add color to it.

5 out of 5 stars. This quick and easy diy bleach sweatshirt project lets you update an old sweatshirt, or a plain new one, with a cool splatter look. In the plastic bucket, prepare a mixture of 1 part bleach to 1 part water.

Take the sweatshirt outside in the grass (not on concrete) and, using the squirt bottle filled with bleach and water, generously squirt bleach in random spots on the sweatshirt. This bleach dye sweatshirt is one of our first bleach dyes. Allow the bleach to sit a while, about 20 to 30 minutes.

So, black results in orange. Materials for reverse tie dye sweatshirt (shibori method) If you like this tutorial, try this tutorial for the scrunch tie dye technique to make this jumpsuit for $25!

It soaked up the solution after 10 or 15 minutes. I wanted to make sure my wine stain was bleach, so i left it out. This time, though, you’re going to let the bleach drain for at least 30 seconds before you turn it over.

Anyways, to create this sweatshirt look, it cost me under $25! Apply a 1:1 bleach and water solution with a spray bottle. In this post you will find a step by step tutorial on how i bleached my sweatshirt.

You can see where and how i squirted the bleach on the lighter sweatshirt, but basically, just squirt it all over the place… and let it sit for at least 10 minutes. Let the sweatshirt sit in the bleach mixture for about 10 minutes, or until you are satisfied with the color change. I really love how my sweatshirt turned out, and i wish i bought matching pants to complete the set.

Tie dyeing is an easy diy project because it doesn’t have to be perfect! He filled the sink up about 12 inches or more of bleach and water. This method is probably the best out of the two ways to tie dye a sweatshirt with bleach.

The gray scale bleached color from 50/50 cotton poly blend is different than the copper bleached color from our 100% cotton due to science. These are fleece lined with a 50/50 cotton/poly blend for maximum warmth. Fold, crumple, or scrunch your fabric.

Gloves are helpful for this part. (scroll for pictures of more folding techniques below!) secure with rubber bands or string. However, when you use bleach you are actually taking color away, this is why it’s called reverse tie dyeing.

After it’s drained, turn it over and check if there are spots the bleach missed. Be sure to bleach both sides of the sweatshirt. To tie dye your clothing with bleach, twist your garment into a tight spiral or several small knots, then secure the twists with rubber bands.

Fill a water or spray bottle with straight bleach and start dosing the sweatshirt with bleach, especially around the rubber band areas. The longer you leave the bleach on, the brighter and lighter it will be. Using a splash of bleach, take your sweatshirt and dip it in.

Wynta Black Bleached Sweatshirt Black bleached shirt