How To Whitewash My Stone Fireplace

Haven’t done it yet but plan to shortly. All i did was use a rag and a paint brush and quickly painted it on the fireplace with the brush and came back through with the rag on each stone.

3 Options for an Outdoor Stone Whitewash Brick Fireplace

Make up your paint mixture.

How to whitewash my stone fireplace. One it was well mixed, she dipped in her painting mitten and began gently brushing the stone. See more ideas about stone fireplace, whitewash stone fireplace, fireplace. I also used a latex paint which did come out fine and a brush.

Look into masonry paint, lighten it w/water, and try that. The darker color seemed too severe for me. An old towel you can throw away.

Annie kauffman fireplace ugly stone fireplace makeover The rag was more for keeping the watery paint contained and not dripping all over the place. In this post, i'm partnering with behr to share with you how to whitewash a stone fireplace, including before and after photos!

Continue painting the fireplace until it is completely covered in a thin coat of the whitewash mixture. Of course mask off everything else &. Apply in light even strokes, blending the mixture into the stone or brick.

One last final before (oh, and take notice of those two weird openings above the stove and watch how the disappear, all thanks to the hubs!). Cover everything around the fireplace. Push your rag with whitewash into the stone.

If this doesn’t work, you can either go completely opaque or remove it. Pour 4 parts water in the bucket. Clean your stone with warm soapy water.

Number of coats will depend on the coverage you are looking for. We had to drill with a masonry bit through the stone but it was. You could also brush a sealer on the stone before you paint.

Using a spare bucket and a paint stick i had my sister bronwyn mix up a 50/50 batch of water and the greystone paint. I dipped my brush in and swirled it around a bit to make sure the water took, and then i’d paint. If your stone or brick is super glossy and slick or pretty dirty (unlike ours which was very porous and relatively dirt/soot free), you may need to use a product like tsp to get the job done.

This is an easy job completed in one afternoon. If you cannot move it, cover it. Insert a wide paint brush into the whitewash solution and paint it onto the stone fireplace making sure to work the bristles around any curves and in the mortar crevices.

I whitewashed my fireplace just to lighten it a little. If you have thought about brightening up your brick or stone fireplace, annie sloan chalk paint is your answer! I used a damp towel and wiped down the whole thing to get rid of dust, dirt and any loose junk.

All you do is water down your paint (20 to 30%), and brush away. I used a 50/50 mix of my paint and water. Supplies needed to whitewash a stone fireplace.

Take your paint, water and tupperware and create your whitewash mixture. I whitewash my stone fireplace also last summer. If you want more of the stone to show through use a bit more water.

Take your designated painting rag and form a ball over the tips of your fingers. The 1:1 mixture of paint allowed for some of the natural variation in the color of the stone to come through. I used watered down ivory paint and i sponged it on.

(test first, but some chalk paints will scrub off easily enough. One of the easiest and fastest ways to lighten up your fireplace is to whitewash it. No matter what ratio you use, make note of it and repeat it!

Please note the supplies are clickable if you want to purchase directly: Dip your brush lightly into mixture and take off any excess. The first step to whitewashing a stone fireplace is knowing how to make a whitewash.

The photo below shows my two mixtures. Take your paint, water and tupperware and create your whitewash mixture. My stone is also a.

All you really need is paint, water, brushes and rags. If you have suit buildup on your fireplace i would suggest using a stone cleaner to thoroughly clean it before whitewashing. Matte paint is a must.

It is important to dab paint off the brush after every dip into the paint mixture. If you then paint w/the chalk paint and don't like it, you can scrub it off w/water and soap. My next attempt is to use a pearlescent paint in certain areas of it to give it extra shine in spots.

Use your staining pad to wipe any excess whitewash mixture. The first step will be to clean your fireplace of any dust, ashes, or suit etc. Dab your brush on a rag to remove excess mixture.

I simply vacuumed all of the stone on my fireplace. Submerge just the ball you formed into the whitewash and once that is good and wet press your rag into the stone. Just neutral white paint, diluted 4:1 and i would use a spray bottle, a small roller & work it in with a small brush.

Emma chapman march 01, 2019. Or try a watered down chalk paint. I picked up a can of benjamin moore’s 1475 greystone and a painting mitten at the local ace hardware.

Now to apply the whitewash. Pour 1 part white paint in the bucket. It’s a “no going back now” kind of step.

I can go lighter if i want to but i actually liked it after one layer. I ended up having my white mixture mostly paint with just a little bit of water mixed in. Apply the whitewash mixture one small section at a time.

Following are the supplies i recommend to whitewash a stone fireplace. This is actually fairly easy. Start off by cleaning your fireplace a bit.

We use this tv mount for hanging our tv above the fireplace. All you have to do is mix white paint and water in equal portions. The hardest part about this job is deciding what color paint to use for your whitewash.

Clean your stone with warm soapy water. While the paint is still wet follow up with your dry rag to blot any excess paint. Cover the floor with plastic and adhere it to the area around the fireplace with painters' tape.

I was a bit nervous, but i felt confident in the paint, along with some research that i had done. I suggest using a bucket for this, though you won’t need much to finish a whitewash well. I did approximately 3/4 paint and 1/4 water.

I ended up adding more water to the mixture every 15 minutes or so. Chalk paint worked well for this and the grey tone looks really nice against my bright white walls. Move furniture that is near the fireplace.

Latest CostFree whitewash Stone Fireplace Thoughts Stone